Overture 239 and LPM

Carrier Ethernet over Bonded Copper Repeater Solutions

 
Overture 239 Repeaters 
  • Extends Carrier Ethernet beyond 20 miles (32km) from the CO
  • Regenerates signals up to 5.7Mbps
  • 1 slot in standard 239 enclosures
  • Compliant with IEEE 802.3ah Ethernet in the first mile
  • Spectrally compliant for all markets
  • Temerature hardened
Line Power Module
  • Environmentally hardened
  • Provides powers for up to 16 Overture 239 Repeaters
  • Repeater Simulation software included
Overture 239 and LPM

Overview

Overture's family of repeaters and line power modules enable a service provider or network operator to ubiquitously deploy Mid-Band Ethernet Services beyond the traditional distance limitations of copper services, reaching sites more than 25 miles (40km) from the nearest serving office. Even when distance isn't the primary concern, the repeaters and line power modules can be used to increase the service rates to a customer, particularly when there are a limited number of lines available to the desired location.

Overture 239 Repeater

Feature Benefit
Regenerates signal up to 5.7Mbps Increases service data rates to long backhaul locations or when pairs are limited
Temperature hardened Ensures reliability and quality when deployed in Outside Plant Conditions
Fits standard 239 enclosures Enables deployment in existing copper facilities

Line Power Module

Feature Benefit
Environmentally hardened                                        Allows deployment at the customer location, central office or both
Powers up to 16 repeaters
Plenty of power to support long repeater chains means there are not artificial restrictions on distance achievable

The Overture 239 Repeater and the LPM8 Line Power Modules are fully interoperable with the Overture’s award-winning Ethernet over Copper (EoC) product suite, enabling the delivery of cost-effective Carrier Ethernet solutions throughout a service provider’s network. The 239 Repeater and Line Power Module are ideal for a variety of applications beyond Enterprise Carrier Ethernet, including DSLAM and mobile backhaul, ensuring high bandwidth for any backhaul application.

Applications

Business Access – The Overture Ethernet over copper products enable 1Mb to over 100Mb services as connections to offices typically providing Ethernet services over bonded copper and bonded T1 where there is not fiber available.  Typical business services carriers sell are metro Ethernet, T1/E1 private line service, Dedicated Internet Access, IP-VPN, VoIP.

Mobile & DSLAM Backhaul – The Overture Ethernet over copper products enable 1Mb to over 100Mb services connection to cell towers, typically providing up to 100 Mbps backhaul services carrying both native Ethernet and native TDM with support for network timing synchronization. The product line is ideally suited for enabling high-speed backhaul to Mobile Cell Towers and DSLAM sites that are capital-constrained to be served by fiber.  The combination of 32 pair bonding, EFM repeaters, and the unique ability to natively transport T1/E1 timing ensures carrier grade backhaul at a fraction of the cost of other technologies. 

Multi-Tenant Campus and In-Building – The Overture Ethernet over copper products enable 1Mb to over 100Mb services for Campus and In-Building applications.  The product line enables carriers to benefit by taking advantage of the existing copper plant on campus or up the risers in buildings, p realizing a huge cost savings while enabling high-speed Ethernet services.

Traffic Light/Video Surveillance – The Overture Ethernet over copper products enable 1 Mb to over 100 Mb services for counties and municipalities who need to increase bandwidth to traffic lights for video surveillance applications where only existing copper plant is available.

Specifications

 

239 REPEATER

INTERFACES
  • 2 copper pairs regenerated per repeater (2 pairs in, 2 pairs out)
  • 12 pin connector that conforms to a standard 239 form factor enclosure
PHYSICAL
  • 2.6H” x 0.75W” x 6.41D” (66mm x 19mm x 163mm)
  • Weight: 5.9 oz ( 167 g)
  • Operating temperature: -40° to +167°F (-40° to +75°C)
  • Relative Humidity: Up to 95%, noncondensing
  • LED monitoring for status of each line supplies
  • Consumption: 4 Watts (for 2 repeaters, 2 watts per copper pair)
  • Input voltage: +/- 130VDC, or -130VDC
COMPLIANCE AND CERTIFICATION
  • ACIF C-Tick
  • CE Mark
  • EN 55022 Class A
  • ETSI 300 019
  • ETSI 300 386
  • FCC Part 15 Class A
  • IEC / UL 60950-1 and 60950-21
  • IEEE 802.3ah, 2BASE-TL, ITU-T G.991.2.bis (Annex A, B, F, & G)
  • ITU-T K.45 and ITU-T K.50
  • NEBS Level 3
  • RoHS
  • Spectral compliance with T1.417, ANFP and all other countries
  • Telcordia GR-3108

LINE POWER MODULE

INTERFACES
  • 8 pairs, non-powered input via two RJ-45 connectors
  • 8 pairs, powered output via four RJ-45 connectors
  • 2 alarm input/outputs via two RJ-45 connectors
PHYSICAL
  • 1.72H” x 10.6W” x 8.7D” (44 mm x 269 mm x 221 mm)
  • Weight: 6 lbs ( 2.72 kg)
  • Mounting: 1RU in 19” and 23” EIA/ANSI, WECO and ETSI Racks
  • Operating temperature: -40° to +149°F (-40° to +65°C)
  • Humidity: up to 95% non-condensing relative humidity
  • Field replaceable fan
  • Power consumption: 125w
  • Input voltage: -40 to -57.6VDC input per GR-499-CORE
  • Redundant power input feeds
  • Optional AC 120/240
  • Supply voltage: +/- 130VDC or -130VDC
  • Powered delivered: 25w per chain for high power model, 13w per chain for low power model
COMPLIANCE AND CERTIFICATION
  • CE Mark
  • EN 55022 Class A
  • EN/IEC/UL/CUL 60950-1 and 60950-21
  • ETSI 300 019
  • ETSI 300 386
  • FCC Part 15 Class A
  • IEEE 802.3ah, 2BASE-TL, ITU-T G.991.2.bis (Annex A, B, F, & G). ANSI
  • NEBS Level 3
  • RoHS
  • Spectral compliance with T1.417, ANFP and all other countries

 

RELATED PRODUCTS